Neorest Installation

Can I install a Neorest on my existing plumbing?
YES – as long as you have a 12” Rough-in and your water supply is located approximately 11” off-center.

Does the Neorest work with a 10” or 14” rough-in?
NO (not yet).

Do I need special plumbing/wiring to use the Neorest?
NO – the water supply connection is standard ½ inch, and the unit plugs into a standard 120 Volt AC (GFCI (fused)) outlet.

What is the required WATER PRESSURE?
You need a MINIMUM of 20PSI. The MAXIMUM is 80PSI Use a minimum water supply pressure of 10PSI (0.07Mpa) flowing. (Warranty valid only if the water pressure is between 20 and 80 PSI).

I want to install a shelf above the toilet – how much clearance should I have?
Toto USA recommends at least 10” of clearance above the top of the Neorest.
Note: that this may effect the remote control’s placement in the bathroom.

	Introducing Cleanrite, Distributors of Quality Bathroom Personal Care Products Offering Quality Constructed Attachments Which Transform Any Toilet or Commode into a Bidet!