|
Installation Instructions
|
Don't have
Acrobat Reader?
Click
here
to download
|
|
|
Accessories
|
|
|
| Installation
|
| By using a
wrench or other proper tool, release the nut on both sides
of the toilet to remove the toilet seat and lid. |
 |
|
|
2. Placing the main unit to
the toilet
|
|
1. Slide the mounting bolts into the grooves at the rear
bottom of the unit according to the distance of the toilet
mounting holes. |
2. Install the main unit on the toilet by inserting the
mounting bolts to the toilet mounting holes. Fit the core
packings and plastic washers on to the bolts from below
the toilet, then tighten the nuts securely. |
 |
 |
3. Connecting the Branching Valve
|
1. Shut off water supply to the water reservoir by closing valve
A.
2. Completely empty water
reservoir by flushing repeatedly. Place a small pan below
shutoff valve ball cock to catch any remaining water in pipes
when unfastening the ball cock coupling nut.
3. Remove existing
pipe A.
4. Branching valve
is standard 1/2" in size. When connecting 3/8", use
the conversion nut with packing before connecting the branching
valve. And then connect the branching valve and valve-coupling
nut with packing.
|
|
|
4. Attach Connecting Tubing
|
|
Use the connecting flexible pipe to connect the body joint of
the main unit to the branching valve with two packing. Fasten
the coupling nuts at the body joint and the branch outlet.
|
|
|
